50 Shelving Anchors
No More Fumbling with Shelving Standards
The built-in spacer for TOGGLER shelving anchors is made to fit flush with shelving standards (C-channel) to ensure accurate alignment and to prevent jacking of the anchor from out of the wall during installation. Eliminates the need for finding a stud. Works as an expansion anchor in a stud. May also use as a picture hook or standoff for installing equipment on hot or wet walls or where ventilation is needed behind installed objects.
Use TOGGLER Specialty Anchors in:
- Gypsum Board
- Acoustic Ceilings
- Tile over drywall
In conclusion, the TOGGLER Specialty Anchors work in any material (concrete, plywood, paneling, drywall, etc.) of any thickness above the minimum grip range.
All TOGGLER Specialty Anchors install in the wall like our TOGGLER Hollow-Wall Anchors, and wedge securely even if you hit a cavity in the wall with your drill. Each also only requires a 5/16″ (ø8mm) diameter drill bit.
Each box contains 50 TBS1 TOGGLER Shelving Anchors and 3 setting keys.
- Minimum wall grip range: 9-13mm
- Minimum screw length: 44mm
- Screw Type: #7 x 1 3/4″ (3.5 x 44mm) flat head standard shelving bracket screw
- Minimum solid wall hole depth: 32mm